Water based, UV resistant, PU based, elastic, waterproofing material
https://geserparex.dumanli.net/en/water-proofing/k10-polyurethane-plus#sigProGalleriad87e9ef8f4
The Name of the Product : K10 POLYURETHANE PLUS
Product Code : Water based, UV resistant, PU based, elastic, waterproofing material
Description : K10 Polyurethane Plus is water based, polyurethane based, ready-to-use, unary, quick-setting waterproofing material which forms watertight membrane on the surface with a perfect chemical strength.
Packaging Type : 5 kg and 20 kg.
Color : Light Grey
Standard : The product is in conformity with TS EN 1504-2.
Areas of Use : Can be used safely for internal and external facades, horizontal and vertical applications, terraces, patios, roof gardens and roofs, balconies, plant pots, drainage systems of retaining walls, base isolation systems, garages, subways and underground storage tanks, wet volumes.
Characteristics : Unary. Ready-to-use; easy application. Can be applied by a spray gun; saves time and labor. It is highly UV resistant. Suitable for walking on the surface once its applied, it is an ideal solution for open areas with pedestrian traffic. It has high splice strength. It has a highly elastic composition. The drying time in between each layer application should be 1-2 hours; you may walk on the surface the product is applied to or apply a coating within the same day. Marble and ceramic surfaces can be coated directly by applying Parexgeser ceramic and granite adhesives on top of K10 Polyurethane Plus. It will not leave any stains on marble and ceramic surfaces. It does not contain any solvent-based materials; can be applied to confined spaces. It is water based, toxic and non-combustible.
Ministry of Public Works Position No : 04.509
Technical Specifications
Appearance : Colored pie
Density : 1,25±0,02 g/cm³
Viscosity : 6000-9000 cpoise
pH : 9.0-10.0
Hard Substance : %64±2
Shore A Hardness : 85
Concrete Adherence Strength : >1 N/mm²
Tensile Strength : 3 N/mm²
Breaking Strain : %380
Water Vapor Permeability : Class 1 (0.7m)
Water Absorption : <0,1 kg/m².h0.5
Drying Time : It will not contaminate hands after 1,5 hours.
Through-Dry Time at 20oC : 4-6 hours
- These figures are provided for temperatures between +23±2 ºC and for 50±5% relative humidity.
Surface Preparation :
General :
- Plaster board, cement or OSB plates shall be fully embedded according to the instructions of the manufacturer.
- Screws and concrete inserts shall be covered with epoxy resin.
- The joints of plaster board plates shall be covered and closed with a plaster board netting at least 50 mm wide.
- All surfaces should be smooth and free of dirt, oil, curing materials and other contaminants.
- All movable parts should be removed and the possible dirt and dust that may be left over should be cleaned.
- All corners and sides shall be chamfered.
New Concrete Surfaces
- All newly poured concrete surfaces should be cured 4 weeks before K10 Polyurethane Plus is applied and shall be undercoated with Lanko 124.
Old Concrete Surfaces
- All surfaces shall be cleaned thoroughly by a strong detergent and all detergent residues shall be cleaned by washing with a water jet.
- The surface shall be left to dry for 24 hours afterwards and shall be undercoated with Lanko 124.
- Before applying K10 Polyurethane Plus, the surface shall be thoroughly examined and if any protrusions that may perforate the membrane are left, they shall be leveled.
Plaster
- Newly plastered areas shall be left for curing for at least 7 days.
Light Blocks
- Surfaces shall be undercoated with Lanko 124 or Geseras EM2 and/or PR6 according to the surface permeability and radiance.
Metal / Wooden Surfaces
- Make sure all surfaces are clear of rust and grease and are undercoated with Lanko 124, Geseras EM2 and/or PR6.
Cracks
- If thin capillary cracks exist and are immobile, they shall be covered with one layer of K10 Polyurethane Plus.
- Cracks wider than 2 mm shall be filled with joint filler. If there are structural, mobile cracks wider than 2 mm, they should be filled with a silicone based joint filler and should be taped with a 50 mm wide plastic tape.
- Afterwards, K10 Polyurethane Plus shall be poured over the tape in one layer and the surface should be left to be cured for 2-4 hours before the second layer is applied.
Application :
- Apply one layer of K10 Polyurethane Plus directly from the package onto the surface by a roller and/or brush.
- Leave the first layer to dry for 1-2 hours. The second layer should be perpendicular to the second layer and shall be left to dry for 2-4 hours at 20oC (The product shall be applied at least in 2 layers. Any imperfections and if any, pores exist on the surface, then a third layer shall be applied).
- Decorative coating may be applied on top of the K10 Polyurethane Plus application if desired.
- The ponding test may be applied 24 hours after the application of the final layer.
- It is of utmost important to provide the right slope in order to prevent ponding.
Consumption :1,7-2 kg/m²/mm thickness
Storage Life:
The expiry date 12 months from the date of production provided that it is stored in sealed (unopened) original package in a dry environment and has not been exposed to direct sunlight and frost.
Safety Precautions/Warnings:
- Use between +5 Cº and +35 Cº.
- Protect against freezing.
- Application should not be carried out during harsh weather conditions.
- The product is sold as ready-to-use and should not be thinned by adding water.
- Sand should not be added. If added, it may adversely affect the elasticity of the product and may cause cracks to appear.
- Do not use for surfaces that are exposed to negative water leakage.
- Wash the used tools with plenty of water after the application. The dried parts shall be cleaned with mechanical means.
- Wash with plenty of water in case of contact with skin and eyes. If it causes irritation, immediately contact a doctor.
- View Product Safety Data Sheet for more information about health and safety titles.
Hazard Warnings :
R 22 : Harmful if swallowed.
Safety Warnings :
S 2 : Keep out of the reach of children.
S 3 / 7 : Keep container tightly closed in a cool place.
S 24 / 25 : Avoid contact with skin and eyes.
S 29 : Do not empty into drains.
S 46 : If swallowed, seek medical advice immediately and show the container or label.
