Binary, fully elastic waterproofing mortar

• Click to open image! Click to open image!
• Click to open image! Click to open image!
• Click to open image! Click to open image!
•  

The Name of the Product     : ESUMORT 2K 227

Product Group               : Binary, fully elastic waterproofing mortar

Description                     : Cement-based, manufactured by modification of chemical additives and polymers,

                                        binary, resistant to sulfates, only suitable for positive use, water and damp-proof,

                                        fully elastic insulation material.

Packaging Type             : Powder ingredient: In 19 kg craft bags

                                        Liquid ingredient: In 7,5 kg plastic buckets

Color                               : Grey and White

Standard                         : TS EN 1504 – 2, TS EN 14891

Areas of Use                   : This product is used horizontally and vertically and only on the positive side for water and damp proofing wet surfaces such as water containers, pools, water tanks, reservoirs, foundations, basement walls, terraces, flumes and retaining walls, kitchens, balconies and bathrooms.

Characteristics/Advantages:

Highly elastic.

High adherence strength.

                                   Easy and fast application.

                                   Suitable for drinking water.

                                   Does not prevent the concrete to breathe.

                                   Does not contract and crack, prevents shrinkage cracks to appear.

                                   Due to its high adherence strength and elasticity, it ensures water impermeability under

                                   cement finishes and ceramic.

Ministry of Public Works Position No         : 04.477/1 and 04.477/2

Technical Specifications :

Color                                                                         : Powder ingredient. Grey and White

                                                                                   Liquid ingredient: White liquid emulsion

Water Vapor Permability (TS EN 1062-3)             : Class 1

Capillary Water Absorption (TS EN 1062-3)         : w < 0,05 kg/m²h½

Adherence Strength                                                 : > 1 N/mm²

Fire Reaction                                                            : : *European class A1

* Without requiring the samples to be tested, according to the decision no. 2000/605/EC

- These figures are provided for temperatures between +23±2 ºC and for 50±5% relative humidity.

Application Information :

Application Temperature                                       : (+5°C) - (+35°C)

Usage Period                                                           : 40 minutes at 20°C

Cooling Down Period                                              : 5 minutes

Mixing Ratio                                                           : 7,5 kg Liquid ingredient / 19 kg Powder ingredient

Pot Life                                                                   : Max. 3 hours

Surface Preparation    :

The surfaces shall be clear of substances that may prevent adherence such as surface molding grease, dust, dirt, paint, detergent, etc. All imperfections on the surface shall be repaired with Parexgroup repair plaster before the product is applied. Sharp corners and joints of structural members shall be chamfered. The application surfaces should be dampened and water-logged before application. The application surfaces shall be undercoated with Lanko 124.

Application                :

• Pour Esumor 227 Fully Elastic liquid ingredient into a clean pot, mix at a slow-speed and add Esumort powder ingredient slowly to this mixture. Mix until a homogenous and pellet-free mixture is obtained. Wait for 10 minutes for the water bubbles occurring as a result of mixing disappear.
• The mixture obtained shall be dampened and the mortar shall be applied with the help of a brush or trowel until 0,75-1 mm thickness is reached onto the water-logged surface. After the first layer settles (approximately 4-6 hours), the second layer shall be applied perpendicularly to the first layer. In total, 1,5-2 mm thickness shall be reached.
• The surface shall not be exposed to direct sunlight, rain and shall be protected against frost at least 3 days before and after the application.
• The floors that shall be walked on should be coated with decorative coatings such as cement finishes, ceramic, porcelain, etc. 3 days after the application.

Consumption             : 3-4 kg/m²

Storage Life   :

The expiry date 6 months from the date of production provided that it is stored in sealed (unopened) original package in a dry environment and has not been exposed to direct sunlight and frost.

Safety Precautions/Warnings:

• Use between +5 Cº and +35 Cº.
• No foreign substance may be added in the prepared mortar.
• The expired mortar should not be re-used by mixing with water or dry mortar.
• Do not apply under direct sunlight.
• Do not apply on surfaces subject to sunlight for prolonged periods, very hot surfaces and frozen surfaces.
• The surface shall be dampened and water-logged before application.
• Wash the used tools with plenty of water after the application. The dried parts shall be cleaned with mechanical means.
• Do not breathe the dust of the product since the powder ingredient is cement based. Avoid contact with skin and eye.
• View Product Safety Data Sheet for more information about health and safety titles.

Hazard Warnings   :

R 36/38     : Irritating to eyes and skin.

Safety Warnings :

S 2             : Keep out of the reach of children.

S 28           : Wash with plenty of water in case of contact with the skin.

S 36/37/39 : Use protective clothing, gloves, goggles/mask while working with the product.

Xi : Irritant

Please click here for pdf document