Epoxy based, horizontal dilation and joint filler
The Name of the Product : GESEREPOXY TD 200
Product Group : Epoxy based, horizontal dilation and joint filler
Description : No solvent, Epoxy-resin based, manufactured according to TS EN 13888-RG class,
decorative for materials such as marble, granite, natural stones, tiles, etc., flexible,
high resistance to water absorption, anti-bacterial, has high cracking resistance,
applicable to 2-10 mm wide joints, perfect adherence without cracking, used for joint
gap formation on surfaces constantly exposed to water.
Packaging Type : 3.75 kg of Component A + 1.25 kg of Component B = 5kg
Color : Light Gray
Standard : TS EN 13888 – RG Class (RG: Joint filler with reaction resin)
Areas of Use : Used for filling of the joints in coatings affixed to surfaces (ceramic, granite, marble,
tile, etc.) in indoor and outdoor places, factories, chemistry and food warehouses,
places with wide wet areas such as pools, water tanks, saunas, kitchens or bathrooms.
Characteristics/Advantages : Resilient to chemicals, acids, alkalis and grease,
Does not produce mold, bacteria and yeast.
Suitable for joints with width between 2 mm to 10 mm
Resistant against water, frost and humidity.
Durable against abrasion.
Easy preparation and application.
Technical Specifications:
Color : Light Gray
Appearance : Mat
Binding Type : Epoxy resin without solvent – Polyamine hardener
Density : 1.80 ±0.05 g/cm³
Hard Substance : % 100
Compressive Strength (28 Days) : ≥ 45 N/mm2
Flexural Strength (28 Days) : ≥ 30 N/mm2
Mixing Ratio : A Component :3 / B Component : 1
Pot Life : 75 minutes (at 25°C)
Drying Time : 12 hours (at 25°C)
Water Absorption : ≤ 0.10 g (after 240 minutes)
Temperature of the Application Floor : (+ )10 and ( +)30°C
Mechanical Strength : Can be exposed to traffic 7 days after the application
Surface Preparation :
Before the joint filler is applied, the surface should be cured with an adhesive. The surface to which the product will be applied shall be cleared off substances that may damage adherence such as dust, paint, dirt, detergents, etc. by an application not damaging to the ceramic.
Application :
- Use clean equipment for mixing and preparation.
- By paying attention to the ratios of A and B components, slowly mix with a slow-speed mixer (400-600 cycles/min mechanical mixer) for at least 3-4 minutes.
- The joints should be filled in with the material with the help of a plastic or hard rubber trowel. Residual material should be scraped off from the joints.
- Depending on the ambient and surface temperatures, wash the surfaces with the help of a sponge and hot, detergent added water and finalize the final patter of the joints. Any contaminated or dirty sponges shall be replaced during cleaning.
Consumption : Consumption Amounts According to the Joint Gaps (g/m²)
Ceramic Dimensions 2 mm 4 mm 6 mm 8mm 10mm
10x10 cm 600 1200 1800 2400 3000
20x20 cm 350 650 1000 1300 1650
30x30 cm 250 450 650 900 1100
Storage Life:
The expiry date is 1 year from the date of production provided that it is stored in dry, 5-35°C environment in its sealed (unopened) original package and in 5-35°Ce environment. Protect against very high temperatures and frost.
Safety Precautions/Warnings:
- Use between +10 Cº and +30 Cº.
- No foreign substance may be added to the prepared epoxy joint filler.
- Do not used at temperatures below +10 Cº or in very humid environments.
- The expired mortar should not be re-used by mixing with water or dry mortar.
- Application products should be cleaned with Epoxy Thinner.
- Wear protective clothing, gloves, goggles/mask during application.
- Protect the product against direct sunlight.
- Partly used products should be kept in their original package and tightly closed.
- View Product Safety Data Sheet for more information about health and safety titles.
Hazard Warnings
R 20/21/22 : Harmful when inhaled, touched or swallowed.
Security Warnings:
S 2 : Keep out of the reach of children.
S 3 / 7 / 9 : Keep the package in a cool and well-ventilated area with the lid tightly closed.
S 24 / 25 : Avoid contact with skin and eyes.
S 28 : Wash with plenty of water in case of contact with the skin.
S 36/37/39 : Use protective clothing, gloves, goggles/mask while working with the product.
S 46 : If swallowed, seek medical advice immediately and show the container or the label.
S 51 : Only use in well-ventilated places.
Xi : Irritant
