Flex Joint Filler 3-20 mm
https://geserparex.dumanli.net/en/tile-adhesives/geserdolex-125#sigProGalleria0181977998
The Name of the Product : GESERDOLEX 125
Product Group : Flex Joint Filler 3-20 mm
Description : Cement-based joint filler reinforced with chemical additives, polymers and
mineral fillers, manufactured according to TS EN 13888, CG2 WA class, decorative
for materials such as ceramic, porcelain tiles, marble, natural stones, bricks, etc.,
flexible, water-repellent, decreases water absorption level, anti-bacterial, has high
cracking resistance, enables 3-20 mm wide joint gaps to be formed, perfect
adherence without cracking, used for joint gap formation on surfaces constantly
exposed to water.
Packaging Type : In 5, 10 and 20 kg craft bags
Color : White and colored
Standard : TS EN 13888 – Class: CG2 WA.
Areas of Use : In indoor and outdoor places, on walls, floors and ceilings, places with wide wet
areas such as pools, water tanks, saunas, thermal baths, bathrooms, outer facades,
in places with under floor heating where temperatures change instantly, for granite,
ceramic, tile, brick and natural stone joints.
Characteristics/Advantages : Due to its silicon containing structure,
Shows extreme performance against contamination.
Can be easily cleaned.
Resistant against frost and humidity.
Incredibly durable against abrasion.
Easy preparation and application.
Non-flammable.
Technical Specifications:
Color : White or colored
Abrasion resistance : ≤ 1000 mm3
Flexural strength after dry storage : ≥ 2,5 N/mm2
Flexural strength after freezing-thawing cycles : ≥ 2,5 N/mm2
Compressive strength after dry storage : > 15 N/mm2
Compressive strength after freezing-thawing cycles : > 15 N/mm2
Contraction : < 3 mm/m
Water absorption after 30 minutes : < 2 g
Water absorption after 240 minutes : < 5 g
- These figures are provided for temperatures between +23±2 ºC and for 50±5% relative humidity.
Application Information:
Application Temperatures : (+5°C) - (+35°C)
Running time at 20°C : 1 hour
Settling Period : 10 minutes
Mixing Ratio : 7 lt water / 20 kg powder component
Pot Life : 1 hour
Period before Starting Using : 24 hours on walls – 48 hours for floors
Surface Preparation :
Before the joint filler is applied, the surface should be cured with an adhesive. The surface to which the product will be applied shall be cleared off substances that may damage adherence such as dust, paint, dirt, detergents, etc. The joint gaps shall be dampened with water before the application.
Application :
- Slowly pour Joint Filler with Silicone straight out of its 20 kg bag into the mixing pot where 6,5-7 liters of water has been placed and slowly mix with a slow-speed mixer until a homogenous and pellet-free mixture is obtained. The prepared mixture shall be left to settle for 10 minutes and then mixed for another 1-2 minutes, then applied.
- The mortar shall be applied to joint gaps by hard rubber tipped mop or a pointing trowel with a rubber base. In order to completely fill the gaps, first parallel then transverse application should be carried out.
- The top layer of the mortar should be removed by a soft tipped putty knife or should be scraped off by a sponge tipped and moistened putty knife and then after being left to settle for 15-30 minutes according to the ambient temperature, the thin layer that may be left on the surface shall be cleaned with a damp sponge.
- The leveling and cleaning of the surface shall be carried out with a dry cloth while the joint is still wet.
- The application shall not be carried out on surfaces exposed to direct sunlight for prolonged periods, or that are too hot or frozen.
Consumption : Consumption Amounts According to the Joint Gaps (g/m²)
Ceramic Dimensions 3 mm 4 mm 5 mm
10x10 cm 700 950 1500
20x20 cm 350 500 700
30x30 cm 250 300 500
Storage Life:
The expiry date is 8 months for the powder ingredient from the date of production provided that it is stored in sealed (unopened) original package and not subject to direct sunlight, humidity and frost and with maximum 8 times piling.
Safety Precautions/Warnings:
- Use between +5 Cº and +35 Cº.
- No foreign substance may be added to the prepared mortar.
- The expired mortar should not be re-used by mixing with water or dry mortar.
- Do not apply on surfaces subject to sunlight for prolonged periods or that are very hot or frozen.
- In order to avoid damage to colored joint fillings, cleaning products such as bleach, hydrochloric acid, lime remover, etc. should not be used.
- To maintain the homogenous color, final wiping shall be carried out with utmost care.
- Since it may cause yellowing on white and light colored joints, do not let the ceramics stay in water before the application.
- Do not inhale the dust of the product since the material is cement based; avoid contact with the skin and eyes.
- View Product Safety Data Sheet for more information about health and safety titles.
Hazard Warnings:
R 36/38 : Irritating to eyes and skin.
Safety Warnings :
S 2 : Keep out of the reach of children.
S 28 : Wash with plenty of water in case of contact with the skin.
S 36/37/39 : Use protective clothing, gloves, goggles/mask while working with the product.
Xi : Irritant
