Thermal Insulation Panel Plaster
https://geserparex.dumanli.net/en/thermal-insulation-systems/optimum-plaster#sigProGalleria894f017baa
The Name of the Product : OPTIMUM PLASTER
Product Group : Thermal Insulation Panel Plaster
Description : Cement-based, reinforced with chemical additives, polymer and fibers, developed
for internal and external coating of thermal insulation panels, practical and easy-to-
use, water and impact resistant, durable against adverse weather conditions, long life
and adjustment time plaster mortar.
Packaging Type : In 25 kg craft bags
Color : Gray
Standard : TSE K 113 April 2011
Areas of Use : As a supplementary product for thermal insulation systems in plaster applications with a netting on internal and external facades.
Characteristics/Advantages : Durable and long-lived.
Resistant to water, frost, moisture and heavy weather conditions.
Minimizes the risk of cracking.
High water permeability.
Easy preparation and application.
Long life and adjustment time
Non-flammable.
Technical Specifications:
Color : Gray
Adhesive Strength (On EPS) : ≥ 0,08 N/mm2
Compressive Strength : > 6 N/mm2
Flexural Strength : > 2 N/mm2
- These figures are provided for temperatures between +23±2 ºC and for 50±5% relative humidity.
Application Information :
Application Temperature : (+5°C) - (+35°C)
Crustation Period : 25 minutes
Settling Time : 10 minutes
Mixing ratio : 6 - 7 lt water / 25 kg powder
Surface Preparation :
The application panel should be clean and dry. Plastering should be carried out at least 48 hours after the affixing of the panels.
Application :
- Slowly add 25 kg’s of Optimum Plaster Thermal Insulation Panel Plaster to 6-7 liters of water in the mixing container and mix with a slow-speed mixer until a homogenous and pellet-free mixture is obtained. Wait for 10 minutes for settling, and then mix for another 1-2 minutes then apply.
- The plaster mortar should be applied with a 10x10mm toothed steel trowel. Corner and window profiles should be mounted. Window and door corners should be reinforced with a traverse plaster netting. The Gesterm plaster netting should be 10 cm overlapped on the joints and junctions and embedded (approximately for 1-1,5 mm) into the surface before the plaster dries with the help of a trowel and close to the outher facades and the plaster surface should be smooth.
- Thickness of the plaster should be approximately 4 mm after the application.
- For temperatures above +25 ºC, in order to prevent sudden water loss and ensure smooth setting of the plaster, the surface should be watered at regular intervals.
- The application shall not be carried out under direct sunlight, rain and during heavy winds.
- The prepared mortar shall be used within maximum 3 hours’ time.
Consumption : 4.5-5 kg/m²
Storage Life :
The expiry date is 8 months from the date of production provided that it is stored in sealed (unopened) original package and not subject to direct sunlight, humidity and frost and with maximum 8 times piling.
Safety Precautions / Warnings:
- Use between +5 Cº and +35 Cº.
- No foreign substance may be added to the prepared mortar.
- The expired mortar should not be re-used by mixing with water or dry mortar.
- In order to extend the durability of the product, the surface should be watered at regular intervals after application depending on the weather conditions.
- Do not apply under direct sunlight.
- Do not apply on surfaces subject to sunlight for prolonged periods or that are very hot or frozen.
- Do not inhale the dust of the product since the material is cement based; avoid contact with the skin and eyes.
- View Product Safety Data Sheet for more information about health and safety titles.
Hazard Warnings:
R 36/38 : Irritating to eyes and skin.
Safety Warnings :
S 2 : Keep out of the reach of children.
S 28 : Wash with plenty of water in case of contact with the skin.
S 36/37/39 : Use protective clothing, gloves, goggles/mask while working with the product.
Xi : Irritant
