Acrylic copolymer emulsion binding base, matt, coarse external coating material
https://geserparex.dumanli.net/en/thermal-insulation-systems/gesertext-coarse-external-coating#sigProGalleria753a688e8c
The Name of the Product : GESERTEXT COARSE EXTERNAL COATING
Product Code : . . . . - . . . .
Description : Acrylic copolymer emulsion binding base, matt, coarse external coating material.
Packaging Type : 15 L.
Color : Standard color scheme
Standard : The product is in conformity with TS 7847.
Areas of Use : It can be used safely on all outer facades of all kinds of reinforced concrete surfaces, surfaces plastered with exposed concrete, ytong, bricks, etc.
Characteristics : Water-based, coarse external coating that perfectly adheres to the
surface it is applied to, does not cause cracking, peel and come off, has
high covering power, its colors do not fade, can be used for decorative
and insulation purposes. Durable against friction and washing, direct
sunlight and adverse effects of salty moisture and allows the surface to
breathe.
Technical Specifications
Binding Type : Acrylic resin / Silicone emulsion
Viscosity (23°C, cPoise) : 13000-17000
Density (g/ml) : 1.63 ± 0.04
pH : 8.00 – 9.50
Hard Substance (% by weight) : 74 ± 2
Glossiness (Gloss, 85°) : Matt (7 ± 3)
Coating Capacity (Practical) : 0.5 - 1 m²/L (depending on the pattern)
Number of recommended layers : One
Drying Time (23°C,%50RR) : Drying: :4-6 hours
Through dry time : 24 hours
Dilution Rate : Can be diluted with 10-15% water when thinner
patterns are required
APPLICATION :
1 - Surface Preparation :
The surfaces onto which this product will be applied to should be sturdy, dry and clean. Blistered and old painted surfaces should be scraped off and cleaned. In order to obtain a smooth surface, Lanko 101 Parenduit or Geserepair 730 think or thick repair mortar should be applied to the surface. If necessary, the surface should be sanded after the repair mortar is applied and undercoated with Gesercoomer Acrylic Housepaint Primer. Also, the product can be diluted by 50% and used as an undercoat itself.
2- Application :
3-4 hours after undercoating, the Geserliccon Coarse External Coating should be either directly applied by a roller or a brush without diluting and if thinner patterns are required shall be applied after 5-10% dilution (by volume) in one layer.
Storage Life:
The expiry date is 2 years provided that it is stored in sealed (unopened) original package in 5-35°C dry environment not directly exposed to sunlight. It should be protected against direct sunlight and frost.
Safety Precautions/Warnings:
- Geserliccon Coarse External Coating should be mixed thoroughly before it is used.
- The ambient temperature should be between 5-35 °C during the application.
- Wash the tools with plenty of water after each application.
- The surfaces to which Geserliccon Coarse External Coating has been applied to should be protected against physical and chemical factors for 2 days.
- Do not empty the coating material to sewerages and water canals.
- The application should be carried out as indicated below.
- Tightly close the packaging after partial use.
Hazard Warnings:
R 22 : Harmful if swallowed.
Safety Warnings :
S 2 : Keep out of the reach of children.
S 3 / 7 : Keep container tightly closed in a cool place.
S 24 / 25 : Avoid contact with skin and eyes.
S 29 : Do not empty into drains.
S 46 : If swallowed, seek medical advice immediately and show the container or label.
