Non-shrinking, highly liquid, fast-setting repair and cast mortar

The name of the Product      : LANKOREP 780 FLUİDE

Product Group               : Non-shrinking, highly liquid, fast-setting repair and cast mortar

Description                     : Cement-based, highly fluid, non-shrinking, unary, structural repair and cast mortar with a special granulometric design

Packaging Type             : In 25 kg craft bags

Color                               : Gray powder

Standard                         : TS EN 1504-3 – R3 Unreinforced use

Areas of Use                  : For repair and reinforcement of beams, columns, flooring, concrete posts, etc.,

                                        For repair and filling works of balconies, banisters, etc.

                                        For assembly of prefabricated concrete elements,

                                        For repair works of ground concrete,

                                        For filling of gaps and cavities in concrete elements

Characteristics/Advantages : Easy to use and apply,

                                        Highly liquid,

                                        High mechanical strength,

                                        Impact and vibration resistant,

                                        Non-corrosive and nonhazardous

                                        Fills up the volume by hardening without any shrinkage

Technical Specifications   :

Appearance                                       Gray Powder

Particle Dimensions                          0 - 4 mm

Application Thickness                      10-100 mm

Unit Weight                                       2100±100 kg/m³

Compressive Strength                      4 hours            ≥8 N/mm²

                                                           24 hours          20-40 N/mm²

28 days           60-85 N/mm²

Flexural Strength                              28 days           ≥ 5 N/mm²

Fire Reaction                                              : *European Class A1

* Without requiring the samples to be tested, in accordance with decision no. 2000/605/EC                                                                                                                  

These figures are provided for temperatures between +23±2 ºC and for 50±5% relative humidity.

Application Information :

Application Temperature                         : (+15°C) - (+35°C)

Operation Time                                          : 15-30 minutes

Mixing Ratio                                               : 4-5 lt water / 25 kg powder

Pot Life                                                       : Max. 45 minutes

Surface Preparation                                  :

The surface should be clean, sturdy and clear of dust, grease, etc. All loose parts on the surface should be scraped off until the substrate is reached. In order to ensure perfect adherence of the material to the surface, all coatings, grease, oils and curing materials on the surface should be cleaned. Chemical cleaning or cleaning with the help of acids should be carried out.

Application                :

  • Slowly add 25 kg’s of Lankoprep 780 Fluide to 4 to 5 liters of water in the mixing container and mix with a slow-speed mixer (max. 600 cycles/min.) for at least 3 minutes until a homogenous and pellet-free mixture is obtained.
  • Immediately after mixing pour the material onto the prepared and finished surface. Remove the air bubbles in the mortar by tampering.
  • In order to ensure that even spreading of the mortar during filling under the foundation plates, during casting;
  • Maximum application thickness is 60 mm. For applications thicker than this, Lankoprep 780 Fluide should be mixed by 4/10 weight (4 kg aggregate/10 kg powder) by Dmax 8-10 mm aggregate. The materials should be poured on the prepared surface, and the leveled and applied. Since the cement ratio will decrease due to the addition of an aggregate, strengths and resistance values might be reduced around 20-40%.
  • The prepared mortar should be consumed within 40 minutes.

Consumption             : For 1 m³ mortar, approximately 2000-2100 kg powder is required

Storage Life   :

The expiry date is 8 months from the date of production provided that it is stored in sealed (unopened) original package and not subject to direct sunlight and frost and with maximum 8 times piling.

Safety Precautions/Warnings:

  • Use between +15 Cº and +35 Cº.
  • No foreign substance may be added to the prepared mortar.
  • The expired mortar should not be re-used by mixing with water or dry mortar.
  • Do not apply under direct sunlight.
  • Use cold water for the mixture when applied at high temperatures.
  • Do not apply on surfaces subject to sunlight for prolonged periods or that are very hot or frozen.
  • In order to prevent the mortar from drying too fast after the application, either apply Gesercure R1 or Lankocure PR2 or dampen the surface after 15 to 30 minutes.
  • Do not inhale the dust of the product since the material is cement based; avoid contact with the skin and eyes.
  • View Product Safety Data Sheet for more information about health and safety titles.

Hazard Warnings:

R 36/38     : Irritating to eyes and skin.

Safety Warnings       :

S 2             : Keep out of the reach of children.

S 28           : Wash with plenty of water in case of contact with the skin.

S 36/37/39 : Use protective clothing, gloves, goggles/mask while working with the product.

Xi : Irritant

 

 

Lankorep 780 Fluide
Please click here for pdf document