Extra ceramic adhesive mortar

• Click to open image! Click to open image!
•  

Product Name                : ESERMIC 100

Product Group               : Extra ceramic adhesive mortar

Description                     : Cement-based,C1T grade adhesive mortar manufactured according to TS EN 12004

                                        using chemical additives and polymers used for bonding tiles, ceramics, glazed tiles

                                        and glass mosaics to walls and floors.

Packing                           : In 5, 10 and 25 kg kraft bags

Colour                             : White and grey.

Standart                          : Conforms to TS EN 12004 Turkish Standarts – Class: C1T

Fields of Application      : Indoors and outdoors

                                        Walls and floors

                                        Bonding tiles, ceramics, glazed tiles and glass mosaics

Properties / Benefits     : Durable and long lasting

                            No vertical sliding

                            Resistant to water and humidity

                            Easy preparation & application

                                        Non-flammable

Technical Properties :

Color                                                                     : Grey and white

Initial Bonding Strength                                      : ≥ 0,5 N/mm²

Post Water Immersion Bonding Strength          : ≥ 0,5 N/mm²

Post Hot Aging Bonding Strength                      : ≥ 0,5 N/mm²

Post Freeze-Thaw Cycles Bonding Strength     : ≥ 0,5 N/mm²

Opentime Bonding Strength (20 minutes)         : ≥ 0,5 N/mm²

Sliding                                                                   : < 0,5 mm

Temperature Resistance                                     : -30ºC ile +60ºC

Fire Reaction                                                       : *Euro grade A1

* Indicated values are specified for conditions at +23±2°C temperature and 50±5% relative humidity.

Application Information :

Application Temperature                                    : (+5°C) - (+35°C)

Applicable Duration                                             : 25 minutes

Resting Duration                                                 : 5 minutes

Mixing Ratio                                                        : 5 – 6 liters of water / 25 kg powder

Container Life (Pot life)                                     : Max. 3 hours

Time Required before ready for use                  : 24 hours after the application (this value is extended at low temperatures and shortened at high temperatures)

Starting Time for Grout Application                  : 24 hours on walls – 48 hours on floors.

Surface Preparation   :

The application surface must be free of materials such as molding oils, dust, paints, dirt, detergents that prevent bonding. Surface cracks must be repaired using Parexgroup repair mortars; high absorbent surfaces must be dampened or lined using Geseras EM2 before application.

Application                :

• Pour 25 kg Esermic 100 into the mixing container with 5-6 liters of water slowly and mix using a mixer preferably running at low speed until there is no coagulation. Rest the resulting material for 5 minutes and proceed to application after mixing for an additional 1-2 minutes.
• Spread the adhesive mortar onto the application surface by pressing and then comb using a toothed steel trowel with a thickness suitable for the size of the material to be bonded.
• Complete the bonding procedure onto the combed surface within 20 minutes maximum. In case somehow this duration is exceeded, remove the applied adhesive mortar from the surface.
• Remove the air using a rubber hammer for good bonding properties.
• In case a film is formed on the surface during application, re-comb the respective area; do not apply on hot surfaces exposed to sun for a long time or on frozen surfaces.
• Apply the mortar both on the surface to be applied and on the back of the ceramics bigger than 20x20 cm for wall and floor applications.
• Consume the prepared mortar within 3 hours maximum..

Consumption             :

Ceramic Sizes                       Comb Teeth Size                  Consumption

10x10 to 20x20 cm                8x8x8 mm                              Single-sided bonding 5 kg/m²

10x10 to 20x20 cm                8x8x8 mm                              Two-sided bonding 6 kg/m²

20x20 to 60x60 cm                10x10x10 mm                                    Two-sided bonding 7-8 kg/m²

Storage Life               :

Expiry date is 8 months starting from the date of manufacture provided that the product is stored in a cool area with 8 stacks maximum in its unopened original packaging and kept away from direct sunlight and freeze.

Safety Precautions / Warnings :

• Use between +5°C to +35°C.
• Do not add any foreign materials to the prepared mortar.
• Do not use the expired mortar by mixing water or dry mortar.
• Do not apply on surfaces hot surfaces exposed to sun for a long time or on frozen surfaces.
• Wait 24 hours on wall application and 48 hours on floor application before grout application.
• Absorbent surfaces must be dampened or lined using a proper primer before application.
• As the product is cement based, do not inhale the powder and let it come into contact with skin or eyes.
• Please refer to material safety data sheet for more information on health and safety.

Risk Phrases :

R 36/38     : Irritating to eyes and skin.

Safety Phrases :

S 2            : Keep out of reach of children.

S 28           : After contact with skin, wash immediately with plenty of water

S 36/37/39 : Wear suitable protective clothing, gloves and eye/face protection.

Xi : Irritants.

Please click here for pdf document