Ready-to-use, thick/thin, striped patterned decorative, 100% acrylic copolymer emulsion based mortar applicable and shapeable with a trowel
The Name of the Product : PAREXGESER ACRYLIC/SILICON COATING “Thin/Thick”
Product Code : . . . . - . . . .
Description : Ready-to-use, thick/thin, striped patterned decorative, 100% acrylic
copolymer emulsion based mortar applicable and shapeable with a trowel
Packaging Type : 25 kg.
Color : Standard color scheme
Standard :The product is in conformity with TS 7847.
Areas of Use : The product can be used safely for various construction materials such as plaster, exposed concrete, aerated concrete, bricks, etc.
It can be used for decorative coating applications as a supplementary product of thermal insulation systems.
Characteristics : Perfect adherence to the surface it is applied to, low water absorption, high
water permeability, durable against friction and washing, unfading colors,
used for decorative and insulation purposes, water based, acrylic, outer
facade coating. Highly decorative with patterns which can be shaped with
the help of a trowel.
Technical Specifications
Binding Type : Acrylic/silicone resin
Viscosity (23°C, cPoise) : 3000-5000 (RV7-50 rpm)
Density (g/ml) : 1.82 ± 0.04
pH : 8.00 – 9.50
Hard Substance (% by weight) : 83 ± 2
Glossiness (Gloss, 85°) : Mat (7 ± 3)
Coating Capacity (Practical) : Fine grained : 2,2-2,8 kg/m²
Coarse grained : 3,-3,5 kg/m²
Application Temperature (°C) : +5°C - +35°C
Pattern Shaping Time : 10 minutes after application
Time Required Before Use : 24 hours after application
(This period shall be longer for lower temperatures and
shorter for higher temperatures)
APPLICATION:
1-Surface Preparation : The surfaces onto which this product will be applied to should be sturdy, dry and clean. Blistered and old painted surfaces should be scraped off and cleaned. In order to obtain a smooth surface, Lanko 101 Parenduit or Geserepair 730 think or thick repair mortar should be applied to the surface. If necessary, the surface should be sanded after the repair mortar is applied and undercoated with Gesercoomer Primer. Cellular or absorbent surfaces like exposed concrete shall be plastered with Gesterm Plaster Heat Insulating Panel Mortar and then shall be coated with 534 Sand Acrylic Coating.
2-Application Method : 3-4 hours after undercoating, the Parexgeser Acrylic/Silicon Coating should be applied to the surface with the help of a steel trowel with an even thickness. The application thickness should be adjusted according to the dimensions of the largest grain in the material. The application surface should be shaped with patterns by using a plastic or polyurethane trowel. The trowel’s surface should be constantly scraped off and cleaned. Attention should be paid to applying the mortar to larger surfaces without any breaks or time in between. Using tapes for windows and balconies is recommended and blind facades should be coated by opening joints or joint gaps. In order to prevent sudden water loss after application for temperatures above +25 ºC and to prevent the coating from drying too fast, the surface should be watered at certain intervals. Do not apply under direct sun light, rain and during strong winds.
Storage Conditions : The product can be stored in its sealed (unopened) original package in 5-35°C dry environments not directly exposed to sunlight for 2 years. It should be protected against high temperatues and frost.
Warnings:
Parexgeser Acrylic/Silicon Coating should be mixed thoroughly before it is used.
The ambient temperature should be between 5-35 °C during the application.
Wash the tools with plenty of water after each application.
The surfaces to which Parexgeser Acrylic/Silicon Coating has been applied to should be protected against physical and chemical factors for 2 days.
Do not empty the coating material to sewerages and water canals.
The application should be carried out as indicated below.
Tightly close the packaging after partial use.
Hazard Warnings:
R 22 : Harmful if swallowed.
Safety Warnings :
S 2 : Keep out of the reach of children.
S 3 / 7 : Keep container tightly closed in a cool place.
S 24 / 25 : Avoid contact with skin and eyes.
S 29 : Do not empty into drains.
S 46 : If swallowed, seek medical advice immediately and show the container or label.
