Performance-enhancing undercoat for absorbent surfaces
https://geserparex.dumanli.net/en/admixtures-and-primes/geseras-em2#sigProGalleria8db576263f
The name of the product : GESERAS EM2
Product Code : Performance-enhancing undercoat for absorbent surfaces
Description : Acrylic, copolymer-based, unary undercoat for absorbent surfaces with binding and adhesion characteristics.
Packaging Type : 5 L, 20 L.
Color : Transparent white
Standard : Product Standard.
Areas of Use : Can be used safely in indoor and outdoor areas and for vertical and horizontal applications,
On absorbent surfaces such as gypsum plaster, gypsum-plywood, exposed concrete, gypsum, lime stuff, chipboard,
On absorbent surfaces before wallpaper and paint applications
Before ceramic, granite or marble coating of absorbent surfaces,
Before leveling screed and similar screed applications.
Characteristics : Easy application.
High adherence.
Moisture-resistant.
Decreases the risk of cracking due to sudden water loss in cement coating applications on absorbent surfaces
Can be applied safely in indoor areas.
Ministry of Public Works Position No : 04.503/2
Technical Specifications
Chemical Structure : Acrylic, copolymer-based
Appearance : White homogenous emulsion
Density (g/ml) : 1.00 ± 0.02
pH : 7.50 – 8.50
Hard Substance (% by weight) : 19 ± 1
Coating Capacity (Practical) : 4 – 7 m²/L (single-layer application (may vary according to the absorbency of the surface)
Recommended number of layers : Two layers
Drying Time (23°C,%50RR) : Initial Drying : 1 - 2 hours
Through-dry Period : 6 hours
Coating application : After 6 hours
- These figures are provided for temperatures between +23±2 ºC and for 50±5% relative humidity.
Surface Preparation :
Application surfaces should be clear of all substances that may prevent perfect adherence such as grease, dirt, rust, old coatings, loose parts, etc.
Application :
- Shake well before use and apply onto the surface with the help of a brush or roller.
- Especially for very absorbent surface such as gypsum-cardboard panels, aerated concrete, gypsum plaster, chipboard, etc., wait for 2 hours in between layers and apply in 2 layers.
Consumption : 150-250 gr/m² in single layer
Storage Life :
The expiry date is 12 months from the date of production provided that it is stored in dry environment in its sealed (unopened) original package and is not subject to direct sunshine and frost.
Safety Precautions / Warnings:
- Use between +5 Cº and +30 Cº.
- Protect against frost.
- Do not add other additives.
- After each application, clean the tools with water.
- View Product Safety Data Sheet for more information about health and safety titles.
- Do not empty the undercoat into sewerage and water canals.
- After partial use, tightly seal the packaging.
Hazard Warnings
R 22 : Harmful when swallowed.
Security Warnings:
S 2 : Keep out of the reach of children.
S 3 / 7 : Keep the package in a cool with the lid tightly closed.
S 24 / 25 : Avoid contact with skin and eyes.
S 29 : Do not empty into the sewerage.
S 46 : If swallowed, seek medical advice immediately and show the container or the label.
